Ripmax Chris Foss WOTs WOT ARTF Foam-E RC Biplane
Ripmax WOTs WOT Foam-E ARTF Biplane The Wots Wot Foam-E makes for a perfect all round sports foam aircraft. The Wots Wot Foam-E combines the slow speed characteristics of the Wot4 Foam-E and the precision and ‘locked in feel’ of the Acrowot Foam-E. The Wots Wot Foam-E has been specifically designed to suit a popular 3S 2200mAh Li-Po battery resulting in a model that will fit in a hatchback car boot fully assembled! For a little more flight time, try the Hi-Energy 2700mAh pack instead. The power system consists of a higher power 920kv outrunner brushless motor with 40A brushless ESC that really packs a punch giving the airframe over 1:1 power to weight ratio! Using a popular 2200mAh battery (not included) the duration is approximately 8 minutes. Supplied in RX ready format the four 9 gram micro servos, outrunner brushless motor and 40A ESC come pre-installed ready to connect up to your choice of receiver and li-Po battery. Using the latest in foam moulding technology you will notice the edges are very crisp and sharp without the weight penalty of a denser foam. The control surfaces use ‘live’ style moulded foam hinges but they also ahve plastic hinges moulded into the foam for extra security. Please Note: If you have not flown an RC model before you will need to learn. Flying any model aircraft requires some degree of care and skill, even the simplest 2 or 3 channel. We recommend you read the manufacturers instructions and prepare for your first flight. There are many useful guides to learning to fly RC aircraft and if you are still unsure help will be readily available at your local club. We recommend a range test before you fly. Your model will have a warranty but this will not cover damage to propellers, wings, fuselage, tail or any other part sustained due to pilot error or loss of transmitter signal. In simple terms, if you crash it, you will be responsible for the repair!!